CISCO ATA 186-11 with Power Supply Adapter For Sale @ Chennai

[Srini]

   

Cisco ATA 186 (Analog Telephone Adaptor)

Note : This is a Used Product but working Perfectly. While Buying, working Demo will be shown to you by SIP Configuration.

Ready to Buy ?

Fixed Price : Rs.6000 /-

Location : 
Nadhivaram , Guduvancherri,
Chennai - 603202

Call us to Buy :
+91-9840847673 (Between 9am - 7pm)

Please do not hesitate to contact me if you require further information.

Mail us : admin@vidyarthiplus.com

The Cisco ATA 186 Analog Telephone Adaptor functions as an analog telephone adapter that interfaces regular analog telephones to IP-based telephony networks. The Cisco ATA converts any regular analog telephone into an Internet telephone. Each adapter supports two voice ports, each with its own telephone number

Power : 0.25 to 7.5W (idle to peak)
DC input voltage : +5.0 VDC at 1.5A maximum

Features :
Contains a single 10 BaseT RJ-45 port and two RJ-11 FXS standard analog telephone ports

•Supports G.711 alaw, G.711 mulaw, and G.723 and G.729a voice codecs

•Uses the Skinny Client Control Protocol

•Converts voice into IP data packets that are sent over a network

•Supports redial, speed dial, call forwarding, call waiting, call hold, transfer, conference, voice messaging, message-waiting indication, off-hook ringing, caller-ID, callee-ID, and call waiting caller-ID

Photos :
   
   
   
   


Setup and Configuration Guides
 STEP 1 Reset your Factory Settings
Pick up the phone handset attached to the Phone Line 1 jack and press the illuminated red button.
Dial: 322873738#
then dial * (asterisk)  and hang up.
NOTE: this will completely reset and erase any values that may already exist!

 STEP 2 Find the IP Address
Pick up the phone handset and press the red button, then
Dial: 21# and you will hear the IP address of your device (e.g. 192.168.0.1).

You can also find the IP Address by logging into the Modem Router.

 STEP 3 
Go to any browser and enter the IP address:
http:///dev
(where is replaced by the address that was found in Step 2.

 STEP 4 
Modify the Settings and Parameters given to you by the SIP Providers.

 STEP 5 
Click on the "apply" button.

 STEP 6
Thats It ! Now Make calls!